Marso-Info-08-GB-09-2017 Technical data sheet Technical specifications Properties•48 to 84 filament yarns and 4 to 8 stainless steel strands •modified temperature-stabilised polyester fibres •colour: blue with stainless steel strands in a check pattern •colour: beige with stainless steel strands in a check pattern •temperature-resistant up to 230°C •resistant to chemicals •very high tensile strength •excellent dimensional stability •maximum wear and tear resistance •UV-resistant Technical data Nominal diameterWall thicknessArticle number DN13 1–1.3 mm B3013 DN20B3020 DN25B3025 DN32B3032 DN40B3040 DN50B3050 DN65B3065 DN80B3080 The B3 braid is used as a pressure carrier for PTFE hose lines. The braid is made of a polymer which was developed for use as a high-performance fibre and has a high dimensional stability and chemical resistance. Thanks to the interlaced, crossing stainless steel strands (4-8 strands made of 1.4404), an electrical conductivity of <10 2 is achieved. The B3 braid Subject to changes according to the current state-of-the-art without notice. This document is intended as non-binding information only. Due to the large variety of installation and operating conditions and application and process technologies, it can only serve as a non-binding guideline and does not release the user from the obligation to check the product supplied by us for its suitability for the intended processes and purposes. This means that this information cannot be used as a basis for warranty claims. As a matter of course, we guarantee the impeccable quality of our products according to our general terms of sale and delivery. Alfons Markert + Co. GmbH A Markert group company Gadelander Straße 135 · 24539 Neumünster Phone: +49 4321 8701-0 · Fax: +49 4321 8701-149 Email: marsoflex@markert.de · www.markert.deNext >